Wuhan Optowix Co.,ltd.
Wuhan Optowix Co.,ltd.
Add to Cart
MK1Q-BDTD-B30/MK1Q-BDTD-B03 100G single fiber optical transceiver module are designed for operating on 100 Gigabit Ethernet links over 40km single mode fiber. The module incorporates one channel optical signal on 1304nm and 1309nm wavelength. Compliant with the QSFP28 MSA. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.
| Product Attribute | Parameter |
|---|---|
| Tx Wavelength | TX1310nm |
| Receiver Type | APD |
| Max Transmission Distance | 40km |
| Maximum Data Rate | 103.1Gbps |
| Connector Type | Duplex LC |
| Transmitter Type | EML |
| Power Supply | 3.3V, 5V |
| Operation Temperature | 0 To 70°C |
| Package Type | QSFP28 |
| DDM Support | Yes |
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Storage Temperature | TS | -40 | - | +85 | °C | |
| Supply Voltage | VCC | -0.5 | - | +4.0 | V | |
| Operating Relative Humidity | RH | - | - | +85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Operating Case Temperature | TC | 0 | - | +70 | °C | |
| Power Supply Voltage | VCC | 3.13 | 3.3 | 3.47 | V | |
| Power Supply Current | ICC | - | - | 1.36 | A | |
| Maximum Power Dissipation | PD | - | - | 4.5 | W | |
| Data Rate(optical) | DRo | - | 103.125 | - | Gb/s | |
| Transmission Distance | TD | - | - | 40 | km | Over SMF |
Optical Characteristics
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Transmitter | ||||||
| Signaling Speed per Lane | 25.78125 | Gbps | ||||
|
Lane Wavelength |
L0 | 1294.53 | 1295.56 | 1296.59 | nm | |
| L1 | 1299.02 | 1300.05 | 1301.09 | nm | ||
| L2 | 1303.54 | 1304.58 | 1305.63 | nm | ||
| L3 | 1308.09 | 1309.14 | 1310.19 | nm | ||
| Total Average Launch Power | PT | 12.5 | dBm | 1 | ||
| Average Launch Power per Lane, | Pavg | 0 | 6.5 | dBm | 1 | |
| OMA, each Lane | POMA | 0 | 6.5 | dBm | 1 | |
|
Difference in launch power between any two lanes(Average and OMA) between any Two Lanes (OMA) |
Ptx,diff |
3 |
dB |
|||
|
Average Output Power (Laser Turn off) |
Poff | -30 | dBm | |||
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 4.5 | dB | |||
| RIN20OMA | RIN | -130 | dB/Hz | |||
| Optical Return Loss Tolerance | TOL | 20 | dB | |||
| Transmitter Reflectance | RT | -26 | dB | |||
| Optical Eye Mask | {0.25,0.4, 0.45, 0.25, 0.28, 0.4} | % | 2 | |||
| Receiver | ||||||
| Signaling rate, each lane | 25.78125 | Gbps | ||||
| Center Wavelength Lane 0 | λ0 | 1294.53 | 1295.56 | 1296.59 | nm | |
| Center Wavelength Lane 1 | λ1 | 1299.02 | 1300.05 | 1301.09 | nm | |
| Center Wavelength Lane 2 | λ2 | 1303.54 | 1304.58 | 1305.63 | nm | |
| Center Wavelength Lane 3 | λ3 | 1308.09 | 1309.14 | 1310.19 | nm | |
| Damage threshold , each lane | Pdamage | -2.5 | dBm | |||
|
Average Receive Power, each lane |
-23 | -3.5 | dBm | |||
| Receiver sensitivity, each lane | SEN | -16 | dBm | 3 | ||
| Los Assert | LosA | -30 | dBm | |||
| Los De-assert | LosDA | -22 | dBm | |||
MK1Q-LRTE is designed for 40km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.
With the rapid development of optical communication and interconnection network in recent years, users’ demand for networks has also surged in line with the trend, which has led to the traffic of telecom backbone networks growing at a rapid rate of 50% to 80% per year. In order to meet the needs of users, the transmission rate of optical communication also increased development, from the previous 10G, 25G, and 40G development to today’s 100G, 200G, 400G, etc. Although 100G optical modules have become the mainstream of the market, the requirements for bandwidth, port density, and the amount of energy consumed by the system are still increasing, which further drives the technology to 200G, 400G, or higher speed systems.
Optowix Transceiver Team can provide technical support and services to ensure that our customers' products and systems are running correctly and efficiently.
We offer a range of services such as troubleshooting, installation, and maintenance. Our team of expert engineers is available 24/7 to answer any questions or provide assistance. We also provide on-site support for emergency situations, and can provide custom solutions to meet specific needs.
We offer a range of warranty options to ensure your Fiber Optical Transceivers are covered for the period of time you need them. We also offer extended warranty plans for longer-term coverage.
Our commitment to customer service is second to none. We strive to provide prompt, responsive service and are always available to answer questions or provide assistance.